Filter By:
Parts & Accessories
$157.00
Fit Kit SET806 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your fat bike with a 12mm rear thru axle.
This kit includes:
- 12 x 209mm thru axle with 1.5 mm thread pitch
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- A pair of OMM Pucks. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware
- Clear protective tape
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm..
$157.00
Fit Kit SET809 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle.
This kit includes:
- 12 x 209mm thru axle with 1.75 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$157.00
Fit Kit SET807 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle.
This kit includes:
- 12 x 217—229mm thru axle with 1.75 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET723.R contains all the parts to mount the rack to the rigid fork of a road or gravel bike with a 12 mm thru axle..
This kit includes:
- 12 mm thru axle with 129 to 135 mm length and 1.0mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack’s load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
Fit Kit Finder: https://oldmanmountain.com/fit-kits-and-spare-parts/#fit-kit-finder
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET706.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.
This kit includes:
- 12 x 125mm thru axle with 1.0 mm thread pitch, with spacer for 119mm spacing
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits.
- Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET712.R contains all the parts to mount the rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.
This kit includes:
- 12 x 122mm thru axle with 1.75 mm thread pitch
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET724.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle..
This kit includes:
- 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch
- Spacers to reduce the length to 128 mm
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
If mounting on a Fox Gravel Fork, please also order 377-1240.
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET810 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
This kit includes:
- 12 x 192—198mm thru axle with 1.75 mm thread pitch
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- A pair of OMM Pucks. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware
- Clear protective tape
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET727 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 135 mm thru axle with M15 x 1.5 mm thread pitch, with a spacer to reduce to 130mm
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$130.00
These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options.
*Third-party panniers are not tested for guaranteed compatibility
- Designed for frictionless compatibility with the Globe Haul ST and Haul LT.
- Accepts most standard bicycle panniers, such as the Specialized Coolcave.
- Includes two adapters (one for each side of the fork) and all required hardware.
- 8kg (18lb) load capacity per side.
- All tools required for assembly included with the purchase of the Haul ST or Haul LT bike
$130.00
These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter.
*Third-party panniers not tested for guaranteed compatibility
- Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT*
- *Not compatible with Globe Pegs due to shared mounting location.
- Accepts most standard bicycle panniers, such as the Specialized Coolcave.
- Includes two pannier adapters (one for each side of the rack) and all required hardware.
- 8kg (18lb) load capacity per side.
- Additional tools required for rear installation (not included).
$121.99
- Wald’s new 157PLYBAG Giant Delivery Basket Liner is made to fit our 157B and 157GB baskets.
- The open-top design allows for easy access to carried items.
- Four snaps hold the liner in place when riding and the base has two grommets to assist with drainage.
- The liner is constructed using 600 denier vinyl backed polyester, offers a double layer base for increased durability, and is available in black.
- Hand crafted in the USA!
- Top = 20 inches wide x 14 inches long
- Bottom = 18.5 inches wide x 12.5 inches long
- Depth = 9 inches
- Weight = 13.5 ounces
$114.00
Old Man Mountain Axle Pack is unlike any fork mount adapter you’ve seen. Rather than trying to clamp to round or tapered surfaces and just hope it doesn’t slip or spin, Axle Pack is thru-axle mounted, making it impossible to slip or spin. Axle Pack is designed to be mounted to Old Man Mountain Thru Axle Fit Kits. With 3-pack mounts on the uprights you can carry bottles, fuel, stuff sacks, dry bags, bolt-on bags, and more. With four mounting points you can also choose to run your gear higher or lower depending on your needs.
- Provides 3-pack mounts on any thru-axle fork
- Axle Pack is rated to 10kg per pair
- Four mounting points you can also choose to run your gear higher or lower depending on your needs
$70.95
The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it.
- Mounts to the B-RAD system or on its own
- Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)
$70.00
All Globe racks are made with T-channel aluminum rails to maximize versatility, capability, and creativity. Many of our Globe-branded accessories mount directly to these channels, but they will also accept just about anything you can imagine bolting to them. To help unlock that possibility, the Rack Customization Kit provides an assortment of bolts and T-nuts compatible with our front and rear rack rails. Just BYO milk carton, wine crate, cooler, you name it! Two T-channel rail pieces can be used to increase the effective dimensions of your rack to provide a more secure platform for large or awkward gear.
- Compatible with Globe Haul ST and Haul LT rear racks, and Globe Front Rack.
- Includes two rack extension rails, eight T-nuts, and 12 assorted bolts.
- All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.
$49.99
- The Basil Buddy Space Frame can be used in combination with the Basil Buddy Dog Bicycle Basket.
- This wire dome is made from hard-wearing steel and prevents your dog from jumping free of their basket while you’re out riding.
- This wire dome comes in classic black.
- Provides complete protection for your dog and total peace of mind for pet owners when out cycling.
$49.99
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.
- Mounts to bottle bosses, or to the B-Rad base for additional carrying options
- Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches)
- Cradle strap is 40mm wide and 350mm long for supporting loads
$45.99
Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails.
WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.
$45.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Long, four-slotted mount allows two, smaller bottles to be mounted in-line
- Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$45.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back.
- Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames)
- 6061-T6 aluminum brackets, stainless hardware
- Weight (no hardware) – 20g
- Maximum load 1700g
- Designed to carry two bottles or accessories off of one B-RAD base
$45.95
B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items.
- Mounts to the B-Rad base mount (not included
$44.99
The MIK Carrier Plate is ideal for cyclists who are looking to upgrade their frame to accommodate the MIK system. This carrier plate allows you to attach any accessory fitted with an MIK adapter to your luggage carrier in as little as one second. You’ve a wide range of accessories to consider, including panniers and baskets with ample storage. Once fitted with MIK system components, it’s as simple as clicking your preferred storage item or accessory into place.
Please note, bikes already fitted with integrated MIK systems including carrier plate needn’t worry about upgrading their bicycle with this accessory. This MIK Carrier Plate is suitable for luggage racks with a width of 100-170mm.
Features:
- The MIK Carrier Plate is suitable for bicycle baskets and panniers from Basil.
- Attach at the rear luggage carrier of conventional and electric bike frames.
- The MIK Carrier Plate is designed for use with accessories that have been fitted with MIK Adapter Plates.
$44.99
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options.
- Fits tubes 20-60mm.
- Engineering grade polymer
- 64 mm mounting height adjustable
- Weight: 128g
- Max load: 3kg / 6.61lb
- Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
$40.00
The EVOC FRAME PAD protects the bike frame from scratches and other transport damage.
- Fits most bike frames
- Attachment for handlebar
- Velcro straps attachment
$39.99
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Three slots for additional adjustments over the B-RAD 2 base
- Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
$37.50
$50.00
25% Off
Add a rack to your frame, even if you don’t have rack mounts. This innovative design allows a standard rack to be bolted directly to the thru-axle for a clean and simple look. It's made from lightweight aluminum to keep weight down and durability high, and it features threads inside of the axle to install the lower mounting bolts.
- 12x148mm axle fits all carbon and alloy Specialized mountain bike frames with Boost rear hub spacing.
Page 1 of 3
Next page