Grips

Gel rubber construction for the optimum balance of comfort and durability. - Diamond pattern provides excellent grip - 90mm length

Gel rubber construction for the optimum balance of comfort and durability. - Diamond pattern provides excellent grip

Luxurious EVA foam. - Excellent OEM replacement - With adhesive backing - 210 x 3cm - Black screw-in end plugs included - A whole spectrum of color options

60g per pair with end caps - 130mm long - 32mm OD

Gel rubber construction for the optimum balance of comfort and durability. - Waffle grip pattern provides excellent grip and vibration dampening - Flange provides added contact enhancing control - Flange cut-away provides shifter and thumb clearance - OD: 30mm - Length: 135mm

Plush, high grip, perforated polymer tape - 210 x 3cm - Waffle texture with super gel - Adhesive backed - Black screw-in end plugs included

Benefits: - Tapered diameter, thin inside, thicker outside. - Micro-diamond pattern with waffle style at the center. - Locking is provided with a single inside collar. - The pair are just above 100 grams. - No flange. Specifications: - 135mm total length. - 29.5mm inside. 33.9mm outside diameter. - 102 grams (3.6 ounces).

The Denim Cox signature Grime Grip features a traditional mushroom pattern in the super soft sticky Krayton rubber that you've come to expect from BSD. The design has reinforced slime at the ends for extra durability and a debossed Grime skull with missing teeth, just like Denim... - Flangeless mushroom design made from soft Krayton rubber - Forever bar ends with washers

Leezy was cutting the inner flange off his Paley Slims so that the mushroom part of the grip went right to the end. His reason being that that it was comfier to catch barspins on. BSD designed the new Leezus Handles around that idea, coupled with their new softer stickier compound these slim grips feel as good as they look.

Simple mushroom style design made of Krayton rubber. - Flangeless slim mushroom design - Bar ends included

Dan Paley signature grips: Dan Paley is really fussy when it comes to grips, not too fat, not too thin, not too squishy, the list goes on. The Dan Paley Slims however are just right. - Flangeless Dan Paley zigzag design - Krayton rubber - Bar ends included

The Bartender, the Jagermeister of grips. No fuss rubber, lock on and rock out. The combination of a tacky rubber compound and the knurled pattern offers the bench mark in traction and durability. - Weight 90g - Single lock on - Low profile design - 30mm Diameter

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On

The Goats Grip just went Super Soft. Prototyped through the 2020 season and based on the World Cup Winning pattern of the Bartender Pro as used by Greg, as well as Nina Hoffman, Danny Hart and Angel Suarez. - Super Soft Compound - 31.5mm Diameter - Single Lock-on - Tapered Core

Chromag teamed up with Brandon Semenuk to create the Liaison Wax Grips. They're perfect for riders who want the cushion and feel of an ‘all rubber’ grip (without plastic core). At 150mm, the Wax Grip is extra wide for lots of hand position leeway. It features a small flange on the inside.

The Format is our first single clamp grip for those who like to make use of the full width of their bars, allowing you to run your hands right up to the edge. We had found some single clamp grips suffer from additional twisting, which is why we designed the sleeve to snugly fit the bars towards the ends. After examining wear patterns of grips that have been through the ringer, we implemented several different patterns and zones into the format to deal with the different dynamics going on in each part of your hand.

Chromag's Basis grip is designed for applications where the rider wants a firm, direct connection for performance in high intensity scenarios. The thin diameter grip with dimpled pattern is firm yet tacky and less prone to surface wear. Chromag grips feature their unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.

DEITY Grip Clamps offer a way to customize your bike to match your style.

Overwhelming demand for a diamond version of the Deity Knuckleduster lead us to the phenomenal feel of the Lockjaw.. With sweeping transitions from the padded thumb area to the deep dish diamond top pattern to a recessed half waffle, the Lockjaw delivers a technically precise feel from end to end. Utilizing TRC+ rubber compound allows us to maintain industry leading durability but delivered in a soft, plush and sticky durometer. By combining our tapered inner sleeve and single lock ring system coupled with our new extra grippy rubber and recessed half waffle, the Lockjaw gives you an extremely responsive feeling cockpit

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.

- 31mm grip with micro diamond pattern - Kevlar infused TRC + rubber compound

- The thinnest DEITY grip to date - Featuring soft DEITY TRC+ rubber compound for durability and increased grip - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward facing bolts that feature loc-tite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort and full range of control - Diamond pattern wraps around the end of the grip - 133.75mm length with a 30.5mm outer diameter - Not compatible with bar ends or plugs - Intended use: All MTN / Enduro / DJ / Slopestyle and DH - 96 grams for the set INSTALLATION TIP: To fully and properly install your SLIMFIT grip due to the tapered inner sleeve...make certain to whack the end of the grip 3 times with the palm of your hand until the grip fully seats onto the handlebar. If you find the fit is a bit tight due to your particular handlebar, a small amount of Isopropyl Alcohol can work wonders for lubrication. Finish the install by tightening the hardware to the specs listed on the packaging.

We've redeveloped our TRC+ rubber compound to deliver 33% more grip and cushion without compromising the amazing durability you've come to expect from all DEITY Grips. Rounding out our grip line to offer something for everyone, the SUPRACUSH Grip delivers the most comfortable and deeply cushioned grip on the market. It's the perfect grip for riders of any hand size looking for increased vibration damping, a larger feeling grip, or a more supple ride. Not only does the SUPRACUSH give you an unmatched level of cushion with our TRC+ rubber compound, but the larger deep-dish diamond pattern offers the most comfortable grip possible without compromising control, precision, or durability. - 34mm outer diameter with plush cushioning throughout - Deep-dish DEITY diamond pattern compresses for comfort but also provides traction - Features soft DEITY TRC+ rubber compound for exceptional durability and increased grip - Tapered inner sleeve to insure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 133mm length with 34mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice - 118 grams for the set

This flangeless mushroom style grip is made in the USA by ODI grips using their super-soft rubber compound, which, combined with our specially designed rib profile, makes for a great-feeling and long-lasting grip. Includes our new USA-made Eclat nylon bar plugs. - Includes Eclat nylon bar plugs - Longer design for today's wider bars - Manufactured in the USA by ODI

NEW SUPERLIGHT XC GRIP FOR 2022! In cooperation with an extensive industrial network in Germany, Ergon‘s Research & Development Team has created a new grip for the Ergon line-up. The new foam-like material offers high damping thanks to the unique material characteristics and achieves a precise texture that matches the zones of the hand. Until now, this was nearly impossible with simple ultralight grips on the market today. Ergon GXR - hand ergonomics and lightweight proprietary AirCell Rubber compound 100% made in Germany! - Size Small: 32mm / 80 grams - Size Large: 34mm / 95 grams - Use: XC, Marathon, Bikepacking, Endurance - Grip material: proprietary AirCell Rubber - SGS Certified for purity and quality - Right and Left hand specific grips. - Completely new grip material for increased damping on your favorite trails. - Optimized form allows for reduced gripping force. - Grip zones are matched to the hand. - Replaceable end plug. - Carbon bar compatible. - No inner core. - No locking clamp.

Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.

All Mountain / Gravity grip with non-biased layout. The GA2 has a superb tactile feel thanks to the new super soft, UV stable rubber compound, which is exclusively developed and manufactured in Germany for Ergon. This translates on demanding trials into more control. The ergonomic optimized form allows reduced force to be used when gripping, as the grip zones are matched to the hand. The inner construction varies in thickness to allow greater damping. The inboard clamp allows even more grip area at the end of the bars, and is completely secure and carbon bar friendly. New cool colors increase the style factor. Only 3.8 oz. (107 g) per pair.

Ergon's GA2 Fat is for riders with large hands or high demands for damping, offering extra thick circumference. The ergonomically optimized form allows reduced force while gripping, because the grip zones are matched to the hand, allowing greater control on demanding trails. The inner construction varies in thickness allowing for greater damping without loss of control. The GA2 Fat has a superb tactile feel, and the super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly. - Length: 136mm - Lock On: Yes - Weight: 135g

Ergon GD1 Evo grips. - Shape: Round - Length: 144mm - Lock On: Yes - Grip Shift Specific: No - Weight: 120g - Flange: No

Ergon introduces the first MTB Gravity Grip with tapered grip shape (patent pend.) which features more damping in the outer area of the grip and a slim inner diameter. The unique rubber compound, manufactured in Germany, offers adhesive and rebound properties which have never been seen before in a bicycle grip. The grip feeling is soft, but still very defined and precise. The surface profile provides the hands with optimal grip and reduced gripping force. The slim inner stop additionally improves fast positioning of the hand. The high-strength aluminum inner clamp keeps the grip twist-proof, even on carbon handlebars. GD1 Slim Factory: With an inner-diameter of 29mm and outer-diameter of 30.5mm, the GD1 Slim Factory is recommended for riders with glove size Small / Medium (6.5 – 8.5) or riders who prefer a slim grip thickness. GD1 Regular Factory: With an inner-diameter of 30mm and outer-diameter of 32mm, the GD1 Factory has, in comparison to the GD1 Slim Factory, more damping characteristics and is recommended for riders with glove size L/XL (8.5 – 10.5) or riders who prefer a normal grip thickness. - Uses: downhill, freeride, gravity disciplines - Clamp: aluminium / CNC machined - Material: custom rubber compound