Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$5.99
A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish
$8.99
Forged Alloy seat-clamp.
$10.99 - $12.99
Forged Alloy seat-clamp with QR lever.
$11.99
Fun handlebar-mount streamers. - Quick and easy installation
$14.99
Adjustable steel kickstand. - Mid-mount
$15.99 - $18.99
Alloy shaft converts threaded forks to work with clamp on threadless Ahead-type stems. - Fits all models of threadless stems with 1-1/8 steerer clamp
$42.50
This custom-made Dropper Post Adapter allows Backcountry Saddle Packs to be used on mountain bike dropper seatposts. The adapter is designed to hold the pack securely, while also limiting travel to avoid damage to either the post or the bag. Comes with a choice of shims for dropper posts with 30.9mm, 31.6mm and 34.9mm lower diameters and is easily fitted using a 3mm hex wrench. The broad, flat rear section and ridged strap retainer improve stability over rough terrain and the adapter is also compatible with any bag that uses a 25mm seat post strap (or smaller). - Designed to work with MTB dropper posts with a 25mm or 26mm upper section diameter - Injection moulded glass-reinforced nylon for durability - Silicone shim for a secure fit - 4.5 x 4.8 x 3.5cm - 53g
$6.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
$34.00
- Includes stainless bolts - Fits 160mm front and 140mm rear rotors
$40.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$40.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$40.00
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
$4.00
2x steel grip collar bolts For use with: - The Bartender Pro Grip - The Bartender Grip
$19.50
Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.
$21.50
When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.
$51.00
Give your Enduro MK3 stem a bit of extra bling and shave off a few grams at the same time. Includes: - 6x Enduro MK3 Stem Titanium bolts
$58.00
Get Wild with Extra Stiffness and More Clearance These super tough axles are constructed to Rockshox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a 6mm allen key fitting on both ends of the axle. This "Get out of Jail" feature might be pretty handy if you manage to chew one end up rushing to put your wheel on when your mates have already set off. We've all been there.... Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel isn't falling off. Benefit from the increased clearance without a lever in the way getting wacked by trailside debris!
$58.00
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
$58.00
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. - Note: This axle is not compatible with Evil Bikes - This axle is very common with a lot of bike brands, please visit burgtec.co.uk for complete fitment info. - Thread M12 x 1.75mm pitch
$67.50
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits the following Santa Cruz bikes: - 5010 V1, V2, V3 - Bronson V1, V2, V3 - Nomad V2.1, V3, V4 - Chameleon V5, V6, V7 - Heckler V7 - Heckler E-Bike V8 - Heckler MX E-Bike - Bantam V1 - Blur TR V1.1 - Blur XC V2.2 - Blur LT V2.2, V2.1c - Blur V3 - Highball V1, V2, V3 - Tallboy LT V1.1 - Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only) - High Tower V1 and V2(MY20 & MY21 only) - High Tower LT V1 - Mega Tower V1 - And Juliana Equivalents Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.
$67.50
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. - For use with 12 x 148 Yeti Bicycles. Fits: - SB165 - SB150 - SB140 - SB130 - SB115 - SB100 - SB4.5 - SB5 - SB5.5 - SB6
$67.50
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. - Please visit https://burgtec.co.uk/product/trek-184-5mm-rear-axle/ for complete fitment info. - Thread M12 x 1.75mm pitch
$71.50
These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time. Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off. Clean, simple, and fast! Replacement for Fox PN: 820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly 820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)
$71.50
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits the following Santa Cruz bikes: - 5010 V1, V2, V3 - Bronson V1, V2, V3 - Nomad V2.1, V3, V4 - Chameleon V5, V6, V7 - Heckler V7 - Heckler E-Bike V8 - Heckler MX E-Bike - Bantam V1 - Blur TR V1.1 - Blur XC V2.2 - Blur LT V2.2, V2.1c - Blur V3 - Highball V1, V2, V3 - Tallboy LT V1.1 - Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only) - High Tower V1 and V2(MY20 & MY21 only) - High Tower LT V1 - Mega Tower V1 - And Juliana Equivalents Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.
$71.50
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature "a get out of jail" 6mm Allen key on the drive side of the axle if you manage to round the non-drive side. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits Yeti Bikes: - 160E - Arc - SB120 - SB140 MY23+ - SB160 Note: Original part for SB120, SB140 MY23+, SB160 is 172mm length, the 174mm axle is still compatible.
$12.45
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
$13.95
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
$14.45
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
Page 1 of 39 Next page