Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Shoes

$349.99
A tough, insulated, waterproof, and comfortable shoe built for riders without an off-season. - Waterproof GORE-TEX Insulated Comfort liner for maximum protection and warmth - Integrated lace shield design with high cuff cover construction - A fleece-lined insole for added insulation and heat retention. - 360-degree reflectivity for high visibility - MICHELIN high-performance, dual-density rubber outsole offers superior traction with unmatched durability, stability, and slip resistance - Torsional midsole “TORBAL” allows natural rider “flow” motion during downhill descents
$60.00
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
$191.99 $239.99 20% Off
The Chamber II shoe holds fast to the legacy of Giro's original EWS and DH World Cup-winning Chamber shoe—secure fit, a durable water-resistant reinforced microfiber upper and a full Vibram Megagrip rubber outsole—and steps up to a new level with a 10mm cleat setback. More setback allows you to position the pedals further back under the arch of the foot to reduce fatigue and enhance positioning for technical terrain. The internal shank also has been updated with a Tri-Mold construction that optimizes stiffness and flex for each zone of the foot. The result is a new level of performance that’s better from top to bottom, with the right amount of flex for uphill pushing, incredible pedaling efficiency, and a better connection to the pedals.
$369.99
With exceptional warmth and waterproofing for the coldest and wettest conditions, a heat-reflecting insole, and a QuickLace system that's housed under the outer shroud, your coldest days on the road are soon to be your favorite. The all-new Blaze is our core winter cycling shoe, featuring modern technical materials and design to reduce bulk while delivering exceptional warmth and weatherproofing for conditions down to -10° C /14° F. The heart of the Blaze is an internal, moisture-wicking mountain bike shoe that's fully insulated with a channeled, high-loft Primaloft synthetic sheath featuring 10,000 W/P + 10,000 GM2 wind- and waterproof performance plus a heat-reflecting insole and protective reinforcement in key wear zones. The result is a breakthrough in warm, dry comfort with purpose-driven details that inspire confidence to pedal through the toughest winter riding conditions. Specs: - Upper Construction: Stretch woven face fabric with 10,000 w/p + 10,000 GM2; film channeled, high-loft fleece interior plus elastic outer collar Primaloft synthetic insulation; Fully seam-sealed stitching; Breathable, moisture-wicking mesh upper inner shoe; Thermobonded rubber toe and heel reinforcements; Integrated ankle padding; Reflective detail at heel and side profile - Reflectivity: Reflective detail at heel and side profile - Footbed: Heat-reflective insole with high loft fleece and laminated foil - Outsole: Nylon-composite plate; Dual-injected "Ice grip" soft rubber outsole; Stainless steel hardware - Weight: 385g (Size 42)
$249.99 - $279.99
The Rincon combines a supple, breathable Synchwire upper with a robust nylon-composite plate and an aggressive, dual-injected rubber outsole for excellent traction that won't de-laminate or break down. A supportive 3D-molded footbed enhances comfort and fit, which is adjustable via a single BOA L6 dial featuring 1mm adjustment and an adjustable forefoot strap. It's a great choice for riders looking for reliable performance with outstanding value in off-road footwear. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Rubber reinforced heel and toe sections - Boa L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - Die-cut EVA footbed with medium arch support Outsole: - Nylon-composite 2-bolt plate with dual-injected rubber outsole - Stainless steel hardware Product weight - 340 grams (Size 42)
$479.99 - $599.99 $599.99 Up to 20% Off
Ultimate road competition shoe with supremely engineered fit and optimum power transfer. FEATURES - 360° surround wrapping upper creates a supremely engineered fit for all riders. - Heel cup with anti-twist stabilization secures optimal foot positioning for intense acceleration and high tempo cadences. - Function-specific zones and scientifically optimized upper materials maximize fit and pedaling performance. - Dual low-profile BOA Li2 dials allow quick and precise micro-adjustments. - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Adjustable powerzone lace guide securely holds forefoot.
$91.00 $140.00 35% Off
Flat pedal mountain bike shoes with an impact resistant toe box. The adidas Five Ten Freerider Pro Primeblue Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage. Recycled materials raise the bar for sustainability. Stealth® rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider family. Their comfortable build lets you move easily from bike to street for everyday versatility. PRIMEBLUE From problem to performance This product is made with Primeblue, a high-performance recycled material made in part with Parley Ocean Plastic. 50% of the upper is textile, 75% of the textile is Primeblue yarn. No virgin polyester. PEDAL-GRIPPING RUBBER Stealth Dotty rubber outsole is size-specific for maximum grip on and off the pedal. IMPACT-RESISTANT TOE BOX Three-layer reinforced toe box adds impact resistance. SPECIFICATIONS - Regular fit - Lace closure - Textile upper - OrthoLite sockliner - Molded EVA midsole - Stealth Dotty rubber outsole - Primeblue - Imported
$189.99
The Stylus features our premium Synchwire single-layer upper that conforms to the foot and provides phenomenal structural support and ventilation. Three compression-molded Velcro straps provide tried and true tightening to create a comfortable, supportive fit. Our injection-molded nylon and glass fiber outsole, with over-molded heel and toe pads plus a universal 3/2 cleat bolt pattern that give you the power and versatility you need to get the most out of every ride. Upper: - Synchwire one-piece composite upper - Laser-cut venting - Three compression-molded Velcro straps - Reflective rear tab logos and graphics Outsole: - Injection-molded nylon and glass fiber outsole - Universal cleat mount (2- or 3-bolt) - Over-molded TPU toe and heel pads Footbed: - Die-cut EVA insole Weight: - 272 grams (size 42)
$134.99 $179.99 25% Off
High-performance XC MTB racing shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rubber XC racing pattern outsole promotes stable pedal engagement and secure walking grip. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.
$300.00
Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)
$80.00 - $140.00
There is nothing like canvas to keep you cool during hot laps or at the post-ride hang spot. The 2FO Roost Canvas combines a durable canvas upper, cushioned EVA foam midsole, and relaxed fit to create a shoe that won't lose its cool. And our SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection to keep you in control through the heaviest rock gardens, making the 2FO Roost Canvas a great pair of kicks with ridiculous trail performance and off-bike comfort and style. Paint Your Trail - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot™ ST rubber sole for unsurpassed flat-pedal grip and connection. - Canvas and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 360g (1/2 pair, Size 42)
$90.00 - $230.00
Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)
$80.00 - $127.50 $80.00 - $150.00 Up to 15% Off
If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy. - Approximate weight: 360g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort and impact absorption. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection.
$123.50 $190.00 35% Off
Flat pedal mountain bike shoes with an impact resistant toe box. The adidas Five Ten Freerider Pro Primeblue Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage. Recycled materials raise the bar for sustainability. Stealth rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider family. Their comfortable build lets you move easily from bike to street for everyday versatility. FROM PROBLEM TO PERFORMANCE This product is made with Primeblue, a high-performance recycled material made in part with Parley Ocean Plastic. 50% of the upper is textile, 75% of the textile is Primeblue yarn. No virgin polyester. PEDAL-GRIPPING RUBBER Stealth Dotty rubber outsole is designed for maximum grip on and off the pedal. IMPACT-RESISTANT TOE BOX Three-layer reinforced toe box adds impact resistance. SPECIFICATIONS - Regular fit - Lace closure - Textile upper - OrthoLite sockliner - Molded EVA midsole - Stealth Dotty rubber outsole - Primeblue - Imported
$110.50 $130.00 15% Off
Whether heading to the gym or the coffee shop, Specialized's Cadettes are an excellent balance of pedaling performance with off-the-bike cushioning and stability. They feature a Body Geometry sole and footbed for optimum alignment of hip, knee, and foot to improve performance and comfort. With a 2-bolt cleat plate, the Cadette enhances pedaling efficiency yet maintains off bike comfort. The mesh upper is breathable and comfortable, while traditional laces with Lacelock allow for easy adjustment.
$164.99 $219.99 25% Off
FLAGSHIP FLAT SOLE SHOE FOR HIGH-ADRENALINE GRAVITY RIDING IN STYLE. FEATURES - Gravity-optimized SHIMANO ULTREAD GR rubber compound and tread pattern deliver legendary pedal grip and control. - Casual skater-style with simple laces and mesh windows for familiar comfort. - Durable rubber outsole with water drainage channels provides enduring grip performance and walkability. - Asymmetrically raised padded ankle collar and sidewall sole for added protection. - Robust toe cap for additional toe protection. - Materials absorb less water and dry quickly.
$169.99
The Gauge is an athletic approach to mountain bike footwear, made to inspire confidence for everything from spirited trail riding to soulful bikepacking adventures. It combines cycling-specific features like clipless pedal compatibility and supportive fit with the reliable grip of an aggressively lugged rubber outsole and the feel of a trail running shoe. With an upper made from supple synthetic fiber and breathable mesh, and a stout injected nylon inner shank to help transfer your power to the pedals, it’s a capable cycling shoe that gives you the confidence to take on any trail.
$289.99
The ultimate MTB shoe for tough terrain and extreme enduro riding. FEATURES - Armored, durable and highly efficient pedaling for aggressive Enduro riding. - Stretch Neoprene ankle collar offers additional protection from trail debris. - Michelin new compound rubber outsole offers superior traction, durability, stability, and slip resistance. - TORBAL torsional midsole allows natural rider flow on descents. - Speed lacing system securely fits a wide range of foot shapes. - Low-profile, reverse-mount buckle securely holds foot.
$249.99
Built for riders without an off-season. - DRYSHIELD membrane with fleece liner keeps feet warm and comfortable in rain, wind, cold, and mud - Insole with fleece liner for added insulation and heat retention - Lace flap and neoprene ankle collar keep out water and dirt - Speed lacing system allow fast, easy adjustments and a secure fit - Adaptable cup insole with fleece liner - 360-degree reflective printing for better visibility - Lightweight rubber outsole offers all-conditions traction and grip
$299.99
Ultimate Cold Weather Flat Pedal Shoe Don’t let the elements keep you inside. Shimano’s GF8GTX flat pedal trail shoe is designed for wet and cold days in the saddle. The shoe features Shimano ULTREAD GF rubber compound that is optimized for low temperatures, enhancing the shoe-pedal connection with maximum pin grip for increased confidence and control on technical trails. Sizing Notice • If your previous shoe model was a ME, please size down. • If your previous shoe model was an AM, please keep the same size. Features: • The GF8GTX flat pedal-optimized trail shoe is built to stand up to cold and wet weather, while still delivering total control on technical downhill terrain • Cold-Weather Ready: BOA closure with bash guard allows for easy operation with winter gloves, while integrated sock-style upper equipped with waterproof GORE-TEX liner keeps elements at bay • Optimized Outsole: Low temperature-specific ULTREAD GF rubber compound delivers optimal performance in cool and cold weather, enhancing pin engagement and shoe-to-pedal connection • TORBAL 2.0: Unique midsole structure allows heel section to move torsionally, maintaining full range of motion for improved rider comfort, fluidity, and on-bike control • Volume Trail Last: Tuned upper is tighter around ball of foot for enhanced control and pedaling efficiency, and has increased volume at the toe box and heel for improved walking comfort and shock absorption
$289.99
The ultimate MTB shoe for tough terrain and extreme enduro riding. FEATURES - Armored, durable and highly efficient pedaling for aggressive Enduro riding. - Stretch Neoprene ankle collar offers additional protection from trail debris. - Michelin new compound rubber outsole offers superior traction, durability, stability, and slip resistance. - TORBAL torsional midsole allows natural rider flow on descents. - Speed lacing system securely fits a wide range of foot shapes. - Low-profile, reverse-mount buckle securely holds foot.
$170.00 - $212.50 $200.00 - $250.00 15% Off
Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)
$84.50 - $91.00 $130.00 - $140.00 35% Off
Classic do-it-all flat pedal mountain bike shoes. Often copied. Never duplicated. The adidas Five Ten Freerider Mountain Bike Shoes deliver legendary flat pedal control to support everything you do on your bike. Just the right blend of casual style makes for easy post-ride transitions. Stealth S1 rubber and a Dotty tread keep your feet firmly planted on pedals. A mix of leather and mesh adds the durability to keep you riding for seasons to come. SPECIFICATIONS - Lace closure - Leather and textile upper - One-piece molded cupsole - Stealth S1 Dotty rubber outsole - Imported
$16.00
Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.
$200.00
The 2FO Cliplite puts precision fit at your toe tips, providing unparalleled pedal input for on-trail control. The micro-adjustable BOA® Li2 dials combined with a welded upper provide a ridiculously comfortable fit. Built on a cushioned EVA foam midsole and relaxed fit last, the 2FO Cliplite keeps you locked in and cooled down for all-day riding without sacrificing off-the-bike comfort and style. The shoe rides on our SlipNot™ FG rubber sole delivering best-in-class pedal grip and connection when hitting full send. The 2FO Cliplite is perfectly adjusted for all-out trail speed. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Welded upper protects and holds the foot to protect and ventilate while tackling gnarly terrain. - Independent BOA® Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa® guarantee. - Lollipop™ nylon shank is paired with an EVA midsole to flex where needed while remaining stiff for pedaling. - Micro-perforated synthetic provides a soft and supple feel without sacrificing protection and durability. - XPEL™ hydrophobic lining provides cushioning and doesn't retain water. - Two-bolt cleat pattern fits all major mountain pedals. - Landing Strip™ cleat pocket guides the cleat into the pedal for insanely fast engagement. - Approximate weight: 424g (1/2 pair, Size 44)
$170.00
If you’re looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper conforms to the foot and is built to last. - Cushioned EVA foam midsole for comfort - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 367g (1/2 pair, Size 42)
$150.00
If you’re looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection - Leather and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 360g (1/2 pair, Size 42)
$150.00
With the Recon 1.0 our goal was simple—put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we’ve created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat—efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we’ve covered the nylon outsole with our SlipNot compound. We’ve also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and even more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)
$150.00
If you're on the hunt for a capable, tough, and versatile pair of mountain biking shoes, look no further than the Rime 1.0. They feature a host Body Geometry hallmarks that you'll find in all of our shoes, plus sweet tech like an X-PEL water management system and a DWR coating that reduces water absorption while drastically improving dry time. And to round out the package, we included a SlipNot Rubber outsole, a Lollipop midsole, and a relaxed fit that balances pedal feel and off-the-bike comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Laces and Hook-and-loop overstrap provide a comfortable with one-hand adjustability - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 370g (1/2 pair, size 42)
$500.00
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongue-less sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$150.00
If you're on the hunt for a capable, tough, and versatile pair of mountain biking shoes, look no further than the Rime 1.0. They feature a host of Body Geometry hallmarks that you'll find in all of our shoes, plus sweet tech like an X-PEL water management system that reduces water absorption while drastically improving dry time. And, to round out the package, we included a SlipNot Rubber outsole, a Lollipop midsole, and a relaxed fit that balances pedal feel and off-the-bike comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Laces and Hook-and-loop overstrap provide a comfortable with one-hand adjustability - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.
$140.00
The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
$250.00
Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding
$575.00
From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156
$15.00
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
$5.25
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
$6.25
Stripped, worn-out—whatever happened to your three-hole cleat attachment is between you and your shoes…or maybe between your shoes and your cleats. Either way, Specialized has a T-Nut replacement kit that's easy to install and even easier than buying a new pair of shoes.
$250.00
The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)
$140.00
The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
$500.00
The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).
$115.00
We all have our tricks for successful cold-weather riding. Want to know ours? Neoprene Shoe Covers. Made for cold, wet, and windy days on the bike, stretchy neoprene and fully taped seams help keep feet dry and comfortable mile after mile. Whether you’re suiting up for a gravel adventure or a road ride, the universal cleat opening makes it easy to pull on over your preferred cycling shoe type. Abrasion-resistant panels in high-wear areas add durability. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester
$130.00
Windy descent. Sudden downpour. Cold, high-elevation climb. Whatever the ride throws your way, our Neoprene Tall Shoe Covers keep feet comfortably pedaling onward. Stretchy high-cut neoprene and fully taped seams keep feet dry and protected in wet and windy conditions. Gravel or road ride, the universal cleat opening accommodates your preferred shoe type. For added durability, abrasion-resistant panels are strategically placed in high-wear areas to ensure these overshoes hold up year after year. - Fully taped seams prevent water intrusion to keep you dry and protected in wet conditions. - Zipperless construction for a comfortable fit around your ankles. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester
$200.00
If you're ready to step up to a higher-performing option that looks good and feels great, the Torch 2.0 is the perfect upgrade for you. The Torch 2.0 is the ideal intersection of high performance and comfort, offering you a pair of shoes you can count on, whether you're joining their first group ride or clipping into the spin bike to get their sweat on. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Woven Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - BOA Li2 dial for dual direction micro-adjustments and pop release, forefoot strap for fine-tuning fit - Seamless Synthetic upper for a supple fit. All over laser perforation added breathability - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 268g (1/2 pair, Size 42)
$119.00 - $136.00 $140.00 - $160.00 15% Off
Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single, lightweight Boa L6 dial that features tool-free snap replacement capability while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)
$153.00 $180.00 - $185.00 Up to 17% Off
If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Approximate weight: 367g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper conforms to the foot and is built to last. - Two-bolt cleat pattern fits all major mountain pedals.
$531.25 $625.00 15% Off
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$179.99
Grip for the groms The Deed Youth shoe is built for the aspiring young shredder, with many of the features and technologies found in the adult-sized version. The upper is constructed with durable, high-quality microfiber for a comfortable and supportive feel on and off the bike. The fit provides a close connection to the pedal for a lower center of gravity on the bike, and the combination of a highly elastic Tack Rubber outsole plus an internal layer of EVA foam provides exceptional grip and comfort. It's a combination that makes the Deed Youth ideal for a day in the life of young riders, from their favorite single track to the local pump tracks or just cruising the neighborhood. FEATURES - LACED CLOSURE — In addition to infinite adjustability and the capability to conform to each zone of the foot, laces offer easy replacement and customization, a more natural feel across the foot, and reliability even in the most adverse conditions. Our tubular woven laces are designed to be highly durable, light, and to hold a knot securely without slipping. - EVA MIDSOLE — EVA is a lightweight, flexible material that helps to disperse pressure and absorb shock, enhancing comfort and stability over rough terrain. It's also lightweight and resists "packing out," making it an essential part of your footwear that helps create a better connection to the pedals.
$119.00 - $127.50 $140.00 - $150.00 15% Off
With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)
$239.99 $299.99 20% Off
With pedal power, a sticky rubber outsole, and an easy Boa and forefoot strap closure system, you can head out wherever the trail takes you in the Ventana Mountain Bike Shoe. This shoe is built around a stout nylon shank proven on the DH World Cup circuit to power the pedals efficiently and combined with an injected EVA cushioning midsole plus our exclusive Sensor rubber outsole that inspires confidence when scrambling over rocks and logs. The fit is secure and supportive thanks to a Boa micro-adjustable buckle and forefoot strap closure, while a reinforced heel and toe box offer protection from scrapes and impacts. - One-piece Synchwire upper design with PU bonded mesh - Rubber reinforced heel and toe sections - Boa l6 dial featuring 1 mm adjustment and macro release, with steel lace and soft lace guides - Velcro forefoot strap - Injected EVA cushioning midsole - Sensor rubber compound engineered for durability and grip - Stainless steel hardware - Molded EVA footbed with medium arch support - 417 grams (size 42.5)
$97.50 $130.00 25% Off
KNOWING YOUR VICES BRINGS YOU CLOSER TO YOUR OBSESSION Building upon our popular VICE, we've added a mid-height cut for additional protection and support. Our exclusive RC Fuzion outsole—an inverse, gradient diameter hexagon pattern designed to bring the pedal closer to the rider. Features: - HIGH GRIP rubber outsole - RC Fuzion features sloped-angle inverse hexagons, varying in diameter for improved pedal contact - Cup outsole features 3mm EVA for additional shock absorption and comfort - Dual-density EVA insole provides additional support and cushion - Durable and protective upper - Suede (Charcoal/Black, Black/White) - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Internal TPU toe protection - Midtop construction for added ankle protection
$120.00 $160.00 25% Off
KNOWING YOUR VICES BRINGS YOU CLOSER TO YOUR OBSESSIONS Evolved from the popular low top Vice, Vice Mid flies casually but packs a punch with a protective mid-top upper and internal toe protection. Dirt jump and slopestyle riders will relish the pedal feel and compliance of the RC Fuzion outsole—an inverse, gradient diameter hexagon pattern that brings the pedal closer to the rider. Paired with the HIGH GRIP rubber, the sloped-angle inverse hexagons, varying in diameter from 9mm at the toe and heel to 7mm at the pedal contact area, allow the pedal to "inject" into the outsole for unrivaled sensitivity. Features: - HIGH GRIP rubber outsole - RC Fuzion features sloped-angle inverse hexagons, varying in diameter for improved pedal contact - Cup outsole features 3mm EVA for additional shock absorption and comfort - D3O High Impact Zone Technology insole absorbs impact and reduces fatigue - Durable and protective upper - Suede (Charcoal/Black, Black/White, Navy/Black) - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Internal TPU toe protection - Midtop construction for added ankle protection
$300.00 - $497.25 $300.00 - $585.00 Up to 15% Off
When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$70.00
Mountain: Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider designed to have just as much performance when hiking as it does when riding. The proprietary SlipNot SuperTacky rubber sole was developed to strike a perfect balance of pedal grip and trail kick. To aid in climbing steep and loose trails, we've built in a flexible toe section that makes it easier to kick into the terrain, giving you a leg up when you hike up. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 386.5 grams
$191.99 $239.99 20% Off
For the Latch mountain bike shoe, we started with a new fit that brings the foot closer to the pedal and flattens the sole profile, optimizing the contact patch between sole and pedal. Then we collaborated with a team of rubber engineers to formulate Tack Rubber, a highly elastic compound that matches grip with durability in our new Gamma tread design. And at the heart of the shoe is a revelation in performance called Mute Foam, a midsole foam that's specially engineered with a slow-rebound action that cuts chatter and vibration to help keep you connected to the pedal, regardless of ruts, roots, and rocks. The unique combination of fit, a fast-drying microfiber upper, the grip of Tack Rubber, and the damping of Mute Foam makes Latch a new benchmark in flat-pedal performance.
$90.00 - $208.25 $90.00 - $245.00 Up to 15% Off
The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Two-bolt cleat pattern fits all major mountain pedals. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
$80.00 - $170.00 $80.00 - $200.00 Up to 15% Off
The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Approximate weight: 395.9 grams - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
$279.99
Simply put, the X-Alp Elevate is a mountain bike shoe for mountain biking. It's not focused on power transfer at the expense of walkability, nor is it a skate-style shoe with cleats attached. Our premier mountain bike shoe is designed for comfort and efficiency on rides that you will describe to your friends as "epic". We updated the X-Alp Elevate with features that make it lighter, more comfortable, and even more capable of exploring the trails less traveled. All-day rides are as much about efficiency as durability, so we removed weight from the synthetic leather tongue and upper. We kept the tried and true Vibram ECOSTEP outsole with EVA cushioning, so you can walk with confidence when the trail gets a bit too techy. Last but certainly not least, we added a second dial to the BOA Fit System, so you can dial in your perfect fit. - BOA Fit System with dual L6 dials to fine-tune fit - Seamless synthetic upper for comfort and durability - Perforated tongue for improved breathability - Reinforced toe box provides impact protection - Grippy Vibram ECOSTEP rubber outsole - Midsole made with 20% renewable algae-based Bloom material - EVA heel cushioning increases comfort and walkability - 2-bolt SPD cleat compatible
$600.00 - $625.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$399.99
Tough enough to withstand even the wettest, coldest rides, the MW702 is engineered to keep you mountain biking comfortably through the winter months. Sporting a fleece insole liner, a waterproof and breathable GORE-TEX layer, and durable ULTREAD XC grip, this shoe is built for those that don't slow down when the temperature drops. Features: - Winter Mountain Bike Shoe: the MW702 is a versatile wet weather racing shoe - Waterproof Shoe: insulated GORE-TEX layer keeps the warmth in and the elements out - High Cut Design: tall cuff construction around the ankles gives added protection - ULTREAD XC Outsole: rugged rubber outsole offers supreme grip in slippery conditions off the bike - Adjustable Fit: L6 BOA® dial closure system cinches in seconds for a secure fit every ride EXCEPTIONAL TRACTION When the going gets tough, confidently keep your footing. ULTREAD sole technology, a new proprietary rubber compound and sole pattern, delivers enhanced durability and traction while walking or pushing your bike over slick terrain. PROTECTION AGAINST THE ELEMENTS The MW702's waterproof GORE-TEX® comfort liner insulates against the cold and wet, with an insole fleece liner for extra heat retention. A wraparound lace shield design provides additional weather-proofing, with a tall ankle cuff to keep moisture and cold breezes out.
$379.99
Take charge of the road with full-featured performance and comfort. To make a full-featured shoe that can handle extended miles and hard roads, we started with an ultralight monofilament mesh Synchwire upper that fits and feels like a second skin, then added thermal-welded TPU for structural support and resistance to grit and grime. Fast, intuitive fit adjustment is guaranteed with dual Boa L6 buckles, steel laces, and soft lace guides that allow you to get a precise fit with even pressure distribution to ensure comfort with every turn of the pedals. And finally, the advanced carbon composite plate ensures efficient power transfer and responsive feel at the pedals, while allowing 5mm of adjustment for optimal cleat positioning. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Laser-perforated ventilation throughout - Dual Boa L6 dials featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - 3D-molded footbed with medium arch support Outsole: - Carbon-composite 3-bolt plate - Dual-injected TZU walking pads - Stainless steel hardware with 5mm fore/aft adjustment Product weight: - 265 grams (Size 42)
Page 1 of 4 Next page