Lubes/Cleaners

- Ultra concentrated! Just one 16oz bottle of 16X Concentrate will make SIXTEEN 16oz bottles of Green Fizz bike wash! - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike. - Use on the whole bike without risk of damage or washing away grease/lube from critical parts. - Safe, biodegradable, phosphate-free, solvent-free, plant-derived, and zero-VOC. Green Fizz 16X Concentrate is a game-changer. Its the same incredible bike wash, only in ultra concentrated form! Just one 16oz bottle of 16X Concentrate will make SIXTEEN 16oz bottles of Green Fizz bike wash! So what is the big deal? It's all about re-using that perfectly good spray bottle you already own, reducing energy use, and saving money! Using Green Fizz 16X Concentrate drastically reduces packaging, shipping cost, and removes 14 plastic bottles from the waste stream. If that is not already reason enough, Green Fizz 16X Concentrate is an incredible value and allows you to boost strength for tough jobs or dilute further for even more economy. The improved Green Fizz bike wash safely, naturally, & effectively removes tough dirt & grime from the whole bike. Developed specifically for bicycle washing, Green Fizz can safely be used on any material without risk of damage or washing away grease/lube from critical parts. The pre-activated, biodegradable formula uses advanced plant-derived surfactants and incredible foaming action to reach surfaces and loosen dirt allowing it to be easily wiped or rinsed away leaving your bike looking like new. Free of harsh chemicals, gentle enough to use on any material, fully biodegradable, phosphate-free, solvent-free, plant-derived, and zero-VOC.

Ideal for use on carbon fibre handlebars, stems and seat posts, our carbon assembly paste is a specially formulated blend of 100% renewable, natural oils and ultra-fine non-slip pumice particles. designed to eliminate slip between carbon fibre components, Gripper paste increases the friction between carbon fibre components and their mating surfaces, so reducing the torque required to clamp them. Our non-toxic formula is also resistant to detergents and washout to give you long-lasting performance in the harshest conditions. - For use on carbon fibre handlebars, stems & seat posts. - Eliminates slip on clamped parts & prevents seizing. - Made of renewable, natural oils and pumice particles. - Readily biodegradable. - 100% pcr & pir recycled packaging. - M15 threaded cap. - Size: 75G

Peaty’s speed grease runs 2.5 times longer than our assembly grease, whilst still providing long-lasting performance under extreme pressures. Perfect for use in race hubs, bottom brackets and other fast-moving parts. - For use in race wheel bearings bottom brackets and fast moving parts - Anti-corrosion protection - Long-lasting lubrication under extreme loads - Anti-corrosion protection - High resistance to water washout - Carbon Safe - 100% RECYCLED PACKAGING - Capacity: 100G COMPATIBILITY Peaty’s speed grease is compatible with all oils of a mineral or synthetic nature except for pag (polyalkylene glycol) based products. ADHESION TO METALLIC PARTS? The number one requirement for a grease is that it lubricates really well. In order for it to lubricate really well, a good grease needs molecules which flow over each other easily (less drag) and coat the metal surface thoroughly and evenly, to prevent metal on metal contact (which results in parts wearing out). In nerd talk, our base oils have been formulated using synthetic esters with a marked polarity. Ok... Who’s ester and why is she in your oil?! Ester isn’t a woman, it’s a variant of synthetic oil! Esters are more expensive than straight synthetic oils because the ingredients all have to be collected from natural sources and then synthesised in much smaller quantities than regular synthetic oil. The number one reason to use ester oil is how well it bonds to surfaces. Ester oil has an electrochemical bond because the ester molecule is polar, sort of like a fridge magnet. It is attracted to metal and sticks like peaty’s hand to a fresh cool pint of yorkshire ale. Also, because of this electrochemical charge, the grease naturally distributes itself evenly over a surface since each molecule will repel away from each other - like trying to push two positive ends of a magnet together.

Born in the lab and raised between the tapes, Peaty's Link Lube is a minty fresh, triple distilled, ultra high speed chain oil for use in all conditions. Our unique two-part formula penetrates and cleans deep inside your chain, driving out moisture, grit and grime and replacing them with unique blend of oils and waxes (Peaty's secret sauce) to lubricate and protect. Yes, you read that correctly... Peaty's Link Lube actually cleans your chain as you use it! - Triple distilled, ultra-high-speed and minty fresh chain oil for use in all conditions - Unique ‘shake-to-awake’ two-part formula penetrates and cleans - Deep inside your chain, driving out moisture, grit and grime and replacing them with a proprietary blend of oils and waxes - Clear tip to the applicator cap so lubricant can be seen filling the chamber just before it drips out - Rounded tip to the applicator cap rolls easily over the chain when applying - Unique tall and slim bottle is shaped to fit like a pen in your hand to make application easy - Triple distilled, ultra-high-speed and minty fresh chain oil for use in all conditions

LinkLube Dry is a readily biodegradable, wax-based chain lube for use in desert dry and dusty, to mildly moist conditions. Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain. - Wax based formulation lasts longer in dry, dusty conditions as it - Does not attract dirt - Blue indicator dye easily shows when lube is dry and ready to ride - Readily biodegradable - Up to ~300km / 190miles per application (depending on conditions) - Rounded tip to the applicator cap rolls easily over the chain when applying - Unique tall and slim bottle is shaped to fit like a pen in your hand to make application easy ALL WEATHER VS. DRY... WHAT'S THE DIFFERENCE? Linklube all weather is our one-stop chain lube for most weather conditions. While the base carrier fluid we use has fast penetrating, chain cleaning properties, it will never become fully dry to the touch. This can lead to unwanted dust attraction in the driest, dustiest conditions, so a more bespoke dry lube is required. WHY WATER? WHY WAX? Wax is the best lubricant for dry conditions because, when applied correctly, it will fill your links and rollers with a hard, slippery coating, which will last for ages on the trails and is dry to the touch - so dry dirt and dust will not stick to it.

Peaty's Foaming Drivetrain Degreaser is the ultimate bike specific, high strength foaming drivetrain degreaser. Our powerful biodegradable formula has been designed to be tough on grime for fast and powerful drivetrain degreasing, while remaining kind to the rest of your bike and the environment. - High-strength biodegradable foaming drivetrain cleaner and degrease - Powerful degreasing action that’s kind to the rest of your bike and the environment - Clever flip nozzle design gives mist or foam spraying options - Designed for regular use without stripping precious bearing greases - Foam increases contact time to help remove dirt and oils WHAT’S THE DIFFERENCE BETWEEN THIS AND THE XXX SOLVENT DEGREASER? While our Foaming Drivetrain Degreaser is formulated to be aggressive on chain lubricants and everyday dirt and grime, it will not attack waterproof bearing greases. For maximum punch, our XXX Solvent Degreaser has been formulated to quickly and easily remove all bearing greases, waxes and oils. So to summarise: Foaming Drivetrain Degreaser for regular drivetrain cleaning and degreasing without stripping precious bearing greases. XXX Solvent Degreaser for badass removal of all greases and waxes.

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Keep your chain running smoothly with Park's Synthetic-Blend Chain Lube. It uses PTFE and a proprietary blend of oils to penetrate, reduce friction, prolong chain life, displace moisture and protect chains from rust and corrosion. Plus, it works great on cables, spokes, and derailleur and brake pivots, too.

Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.

The 2336K consists of two complete sets of sponges and wicking pads, the most common wear items in the CM-25 Chain Cleaner.

HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.

Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Notice: Must be used on all component, fastener and carbon fiber surfaces in conjunction with threadlockers and retaining compounds that contact carbon fiber such as PF30 bottom brackets or brackets or bearings pressed into carbon fiber frames. Failure to do so could result in permanently bonded parts.

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

The Muc-Off All-Weather Chain Lube is a high-performance synthetic lubricant. The unique water repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion metal-to-metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the toughest of rides. Muc-Off's formula provides lubrication for long-distance, on & off-road riding in all conditions. - Ideal for MTB, Road, Cyclocross and Commuting - Suitable for use in all weather conditions - Added protection against contaminants - Provides smooth and quiet gear shifting - Reduces friction and improves efficiency - Derived from renewable sources - Can be applied to chain, cables, shifters, derailleurs, pedals & cleats - Pipette system for easy application - Readily Biodegradable* - Integral UV tracer dye - aids accurate application to ensure total protection. *Only contents are readily biodegradable.

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

- Ultra durable, long distance chain lubricant - Excel in long distance wet or muddy conditions - It penetrates deep into the chain links core to provide long lasting lubrication and total protection - Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain

A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in dry and dusty conditions. Formulated with our unique eBike specific lubricity pack to handle the higher-torque loads of an eBike drivetrain. Ideal for chains, cables, shifters, derailleurs & pedals. - Creates a dry ceramic coating for increased durability and dry condition performance - Contains Boron Nitride compounds - Ceramic compounds provide ultra-low friction for unparalleled lubrication - Non-dust attracting - excels in dry and dusty conditions - Utilizes biodegradable organic compounds - Ideal for road and off-road

A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in wet and harsh conditions. Formulated with unique eBike specific lubricity pack to handle the higher-torque loads of an eBike drivetrain. Ideal for: Chains, cables, shifters, derailleurs & pedals. - Specifically designed for the hi-torque loads applied to an eBike chain - Creates a ceramic coating for incredible durability and long-distance performance - Contains Boron Nitride compounds - Ceramic compounds provide ultra-low friction for excellent efficiency - Waterproof - excels in wet conditions - Readily biodegradable - Ideal for road and off-road - Integral UV tracer dye - aids a

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal to metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

Keep those shoes clean! Our Muc-Off Premium Bike Shoe Cleaner makes it easy to get rid of dirt, grime and odors from the outer material of your MTB, gravel or road cycling shoes. It’s a non-toxic, yet super powerful cleaner that’s not only safe for you and your shoes but the environment too. Look fresh, ride rad! It’s a non-toxic, yet high performing neutral cleaner that is effective at cleaning a range of grime and stains without affecting the breathability of materials. Formulated without any harsh chemicals or abrasives to ensure it is safe to use on the wide range of materials used in shoes. It has been tested on over 60+ shoes made from a very wide variety of materials, including: Natural fabrics, synthetic fabrics, technical fabrics, suede, nubuck, leather and other fabrics. Features: - Biodegradable, environmentally friendly, water-based formula - Powerful cleaning performance - Doesn’t compromise breathability - Suitable and safe - specifically designed for bike shoes - Safe on technical fabrics, suede, nubuck, leather and other fabrics* - Perfect for preparing your footwear for fresh waterproofing/re-proofer treatments such as Muc-Off Premium Footwear Shield - Handy sized 250ml spray bottle

- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal to metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

-50°C Chain Lube is specifically designed to withstand the coldest of conditions. Whether you're a roadie, mountain biker or fat bike rider, -50°C Chain Lube will keep your chain running smoothly and prevent any links from freezing. - Ideal for Road Cycling, Cyclocross, MTB & Fat Bikes - Provides the ultimate performance in freezing conditions - For chains, cables, shifters, derailleurs, pedals & cleats - Incredible durability - Pipette system for easy application

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection