Apparel

Whether you're stomping huge air at Whistler, pinning the fastest line at Les Gets or anything gnarly closer to home, the Full-10 Spherical represents the pinnacle in both protection and performance. The Descendant Building on the success of the Full-9, along with feedback from trusted athletes, and featuring new technologies we developed in-house, the Full-10 Spherical was engineered to be the new standard in DH fit, protection, and style. Created in the Bell+Giro testing Dome in Scotts Valley, CA, our proprietary Spherical Technology powered by Mips features a ball-and-socket design that helps redirect impact forces away from the brain, allowing the outer liner to rotate around the inner liner during a crash. In addition, the Spherical Technology channels inside the lightweight unidirectional carbon shell allow us to achieve superior ventilation like never before—what we are calling our Thermal Exchange Airflow System (T.E.A.S.). This system sucks in cool air like a vacuum and then expels hot air through the side and rear exhaust ports because as any rider knows, ventilation and sweat management go hand-in-hand. With the Full-10, the effort is evident—from Ionic+ antimicrobial* comfort padding and magnetic cheek pads to an integrated breakaway camera mount and titanium D-rings on the chin strap. This work has all been for you the rider, because when you are in the start gate, or at the lip of the jump that will launch you to glory, we want you to only be thinking about the ride ahead. [Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.] *Ionic+ antimicrobial padding uses silver for helmet odor control - SPHERICAL TECHNOLOGY Spherical Technology's Ball-and-Socket design, powered by Mips, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. - THERMAL EXCHANGE AIRFLOW SYSTEM Our most extreme ventilation system that sucks in cool air like a vacuum and then expels hot air through the side and rear exhaust ports. - IONIC+ PADDING Quick-drying interior padding helps manage sweat while fighting odor-causing bacteria. - INTEGRATED BREAKAWAY CAMERA MOUNT A seamless camera mount, requiring no zip ties or tape, is engineered to break away upon impact to help reduce the risk of injury. - PROGRESSIVE LAYERING The process of engineering a helmet liner with variable EPS foam densities to better manage the transfer of energies after some impacts. - FLYING BRIDGE VISOR TECHNOLOGY This visor design allows more flexibility and improves airflow across the helmet. By not using a traditional center post and screw concept, we're able to increase the amount of energy management material in a high-impact zone. - MAGNEFUSION MAGNETIC CHEEK PADS Magnefusion Cheek Pad Emergency Release System. - PANORAMIC GOGGLE PORT TECHNOLOGY A wider port provides better fitment, optimal sealing, and a massive field of view, increasing the rider's visibility and safety when needed most.

The all-new S-Works Ares 2 is the ultimate shoe for racers looking for the most positive, locked-in feel without sacrificing comfort. Engineered with our Body Geometry methodology for power, comfort, and pedaling precision—delivering a 7-watt power increase while reducing forefoot pressure by 44%. The S-Works Ares 2 is the pinnacle of race footwear—redefined. - Use – Road racing. - Body Geometry Last – All-new Body Geometry last reduces forefoot pressure by 44%. - Outsole Material – Unidirectional carbon. - Fit System – BOA® Li2 Fit System. - Weight – 263g for a half-pair, size 44

The all-new S-Works Ares 2 is the ultimate shoe for racers looking for the most positive, locked-in feel without sacrificing comfort. Engineered with our Body Geometry methodology for power, comfort, and pedaling precision—delivering a 7-watt power increase while reducing forefoot pressure by 44%. The S-Works Ares 2 is the pinnacle of race footwear—redefined. - Use – Road racing. - Body Geometry Last – All-new Body Geometry last reduces forefoot pressure by 44%. - Outsole Material – Unidirectional carbon. - Fit System – BOA® Li2 Fit System. - Weight – 263g for a half-pair, size 44

Welcome to the lightweight revolution with Prolight Techlace, the only 150-gram cycling shoe with pro-level performance. The Prolight Techlace combines exceptional stiffness, fast adjustability, and incredible weight savings. To get these benefits, Giro focused on three key areas: an ultralight upper made with a technical monofilament mesh with Teijin TPU welded reinforcement that doesn't stretch under power; the Techlace closure system that combines the comfort of laces with on-the-fly adjustability; and finally, the TeXtreme carbon fiber outsole. This unconventional composite is woven in flat sheets instead of threads, producing a carbon fiber that's ultra-stiff, yet lighter because it requires less resin. When every gram matters and every second counts, Prolight Techlace amplifies your performance. - Techlace Pro retention - Teijin welded SL technical monofilament mesh - TeXtreme advanced carbon fiber outsole - Bonded walking pad - Titanium hardware - Prolight footbed - Prolight SuperNatural Fit Kit with adjustable arch support - X-Static anti-microbial fiber - Travel bag included - Weight: 150 grams (size 42.5)

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The Chrono Pro One is the go-to choice when you want to have your best day on the bike. This one piece combines the functionality of a jersey with the performance of a skinsuit, while offering uncompromising comfort. Gradient Stretch Woven fabric provides supportive compression with impressive durability. Expandable Storage Pockets (ESP) allow you to carry everything you need -- and all the things you want -- for all-day adventures on the bike. - Gradient Stretch Woven material - Made in Italy of Italian fabric - Chrono Pro Cytech chamois - UPF 50+ (all materials except front) - Lumbar support panel - 3 Expandable Storage Pockets (ESP) plus a secure zipper pocket - Full-length front zipper - Silicone leg gripper - Laser-cut leg and sleeve openings

For Dissident II, we collaborated with powerhouse athletes, Loïc Bruni and Finn Iles, to design a helmet that would meet the highest demands of downhill mountain bike racing, in terms of confidence, a modern-styled fit, and breathability.With five strategically placed EPS foam inserts, we’re able to tune for higher and lower density foam based on where it is being configured inside the helmet—allowing us to maintain a light weight and still manage energy. The use of a softer foam density allows more energy to be absorbed in an impact, transferring less to the rider. Dissident II also provides added confidence through its Mips Evolve Solution—that helps to redirect rotational movement away from the head. In this Evolve Solution, we utilized fabric pocket attachments inside, reducing creakiness.Remaining cool is more than a state of mind, and it’s hard to keep your composure when things get hot—specially when your head feels like its in a sauna. That’s why instead of focusing on more vents, we focused on better vents. Built from the inside out, the Dissident II ventilation system features a hood scoop to channel a flow of cool air in, and purpose-placed vents that direct the warm air out—letting your head stay cool and comfortable in any situation.Keeping this helmet light was of high importance. In a race context, feeling light and mobile leads to faster reactions, and reduced fatigue between the tape. With the EPS foam insert construction, the helmet remains very light while still offering big protection. While we can’t speculate on everything that was going through Finn Iles’ head during his 2022 winning run at Mont-Sainte-Anne—we know what he wasn’t thinking about… Whether you’re taking the stage to drop in on your first winning World Cup run, or chasing your own championship on the local enduro series, Dissident II has you covered.For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - 3 Layer Construction: Carbon Shell / Poly Carbonate / EPS. - 5-unique pieces of EPS tuned to optimized performance in each specific location. - Mips Evolve Solution: Fabric pocket attachments to reduce bobble head and creakiness. - Ionic Plus Fabric anti-microbial pad kit. Replacement crown pad and two sizes of emergency quick-release cheek pads included. - Breathability optimized with hood scoop. - Sizes: S, M, L, XL (4 Shell sizes). - Travel Bag. - D-Ring Buckle. - Weight: Medium - 940g.

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

From recent road converts, to sultans of dirt speed, the new S-Works Recon delivers pavement-bred performance to the gravel and XC discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there are no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - Approximate weight: 280g for a 1/2 pair size, 44

Ultimate road competition shoe with supremely engineered fit and optimum power transfer. FEATURES - 360° surround wrapping upper creates a supremely engineered fit for all riders. - Heel cup with anti-twist stabilization secures optimal foot positioning for intense acceleration and high tempo cadences. - Function-specific zones and scientifically optimized upper materials maximize fit and pedaling performance. - Dual low-profile BOA Li2 dials allow quick and precise micro-adjustments. - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Adjustable powerzone lace guide securely holds forefoot.

Giro's Factor Techlace is a race-bred cycling shoe that couples the benefits of the Techlace system with the easy adjustment of a Boa dial, plus the performance you expect from Giro—all at an impressively low weight of 210 grams (size 42.5). The Techlace system replaces D-rings and other hardware with laces, providing a more supple feel across the forefoot, and the laces can be easily replaced if damaged. The Boa IP1 dial offers fast, intuitive adjustment in 1mm increments when tightening or loosening. The Factor Techlace upper is constructed with Evofiber SL, which is durable yet highly breathable. Inside the shoe, the SuperNatural Fit footbed features adjustable arch supports to personalize fit, comfort and pedaling efficiency. Power transfer is bolstered by the Easton EC90 SLX2 carbon fiber outsole, which is among the lightest, thinnest and stiffest pedaling platforms on the road, giving you a direct connection to the pedals. - One-piece upper design - Premium Evofiber SL breathable - Teijin microfiber - Techlace + Boa IP 1 dial (1mm +/- with macro release) - Easton EC90 SLX2 high-modulus carbon - Steel hardware - Replaceable heel pads - Super Natural Fit Kit with adjustable arch support - X- Static anti-microbial fiber - Travel bag included - Weight: 210 grams (size 42.5)

The Factress Techlace is Giro's lightest weight women’s road shoe, featuring a revolutionary closure system that couples the benefits of laces with the convenience of a dial. The Techlace system replaces D-rings and other hardware with laces, providing a more supple feel across the forefoot, and the laces can be easily replaced if damaged. The Boa IP1 dial offers fast, intuitive adjustment in 1mm increments when tightening or loosening. The Factress Techlace has all the performance you’d expect from Giro: The upper is constructed with Evofiber SL, which is durable yet highly breathable. Inside the shoe, the SuperNatural Fit footbed features adjustable arch supports to personalize fit, comfort and pedaling efficiency. Power transfer is bolstered by the Easton EC90 SLX2 carbon fiber outsole, which is among the lightest, thinnest and stiffest pedaling platforms on the road, giving you a direct connection to the pedals. - One-piece upper design - Premium Evofiber SL breathable Teijin microfiber - Techlace + Boa IP 1 dial (1mm +/- with macro release) - Easton EC90 SLX2 high-modulus carbon - Steel hardware - Replaceable heel pads - Super Natural Fit Kit with adjustable arch support - X- Static anti-microbial fiber - Travel bag included - Weight: 210 grams (size 42.5)

At just 175 grams (size 42.5), Giro's Empire SLX sets a new standard for lightweight cycling footwear. Yet it doesn’t compromise the structure or stiffness needed to put full power to the pedals thanks to a combination of exceptional fit, new Evofiber SL one-piece uppers, and the Easton EC90 SLX2 high-modulus outsoles. And with replaceable heel pads, full titanium hardware, and Giro's adjustable SuperNatural Fit Kit, these are full-featured shoes built to win, and built to last.

Strap into an evolution and welcome the Aircraft2. Developed in conjunction with athletes at the forefront of riding and racing like Sam Hill, the Aircraft2 takes notes from its predecessor, the Aircraft, and builds. Offering superior protection for when your routine gets off track with our proprietary Smartshock Technology, the most advanced helmet to date is ready for flight. - Carbon Fiber shell with paten pending injection molded chin bar integration - Smartshock® Rotational Protective System (14 point) - Incredibly sturdy, full face downhill helmet - Multi-density EPS foam injection molded with polycarbonate in size specific molds - Massive airflow with a class-leading 20 ventilation ports - Multi-point adjustable visor designed for maximum vision and goggle stowage - Washable, moisture-wicking anti-microbial liner - D-Ring buckle for maximum security - The Aircraft 2 is tested and certified according to ASTM (F1952-15), CPSC (16 CFR 1203), CE (EN 1078:2012+A1:2012), and AS/NZS (2063:2008) Bicycle Standards

The pinnacle of lightweight, weatherproof protection, Skypilot delivers best- in- class breathability, ready for wherever the trails take you. From local loops to long trips into the backcountry, Skypilot's soft and silent gore-tex active 3l fabric breathes and protects like a second skin, keeping your temperature in check even under hard efforts. And at just 217g, it packs down into a small pack or bikepacking bag with ease. A smooth-running front zip handles closure duties, while to the rear, a dropped hem keeps water at bay, aided by a roomy hood built to extend over a helmet and cinch for a custom fit. Well-placed front hand pockets complete the jacket. - over the helmet hood with 3-way draw cords - elasticated cuffs - watertight zippered hand pockets - drop back hem - hem draw cord - body: gore-tex active 3l, 3d 1% nylon plain weave, c-knit backer - front zip: #3 watertight vislon

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot. Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments. Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee. Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

At just 185g per shoe with pro-level performance and unrivaled comfort, the Empire SLX lets you fly in first-class style. To make a minimalist shoe that retains the supportive structure of the legendary Empire while advancing the style, we started with a one-piece ultralight monofilament Synchwire mesh upper designed around a classic laced closure to fit and feel like a second skin. Thermal-welded Teijin TPU adds structural support exactly where its needed, and a high-modulus Easton EC90 SLX2 carbon fiber plate provides ultimate stiffness to weight for power transfer. Our adjustable Super Natural Fit footbed system is the final touch, allowing you to customize arch support right out of the box for luxurious comfort and optimal pedaling efficiency. - One-piece upper design - Premium Evofiber SL breathable Teijin microfiber upper - Empire laces: hold a knot, durable, and light - Easton EC90 SLX2 high-modulus carbon - Titanium hardware - Replaceable heel pads - Ultralight Super Natural fit kit with adjustable arch support - Ultralight footbed - XT2 anti-microbial fiber top sheet - 185 grams (size 42.5 with ultralight footbed)

From the Enduro World Series to Red Bull Rampage, top riders demand the Giro Insurgent Spherical and the confidence it delivers. Our engineers maximized the intake points for cool, fresh air, resulting in cooling power 50% more efficient than the Disciple MIPS. A lightweight, soft-touch, and absorbent pad set includes two different cheek pads with each of the three sizes, allowing for a customizable fit, which are secured via a directional snap system allowing for easy removal in case of a crash. At 1,040 grams in size M/L, the Insurgent is 200 grams lighter than the Disciple MIPS despite additional features including the advanced protection performance of Spherical Technology. Insurgent Spherical utilizes a pair of different density EPP and EPS foam layers that work like a ball and socket to redirect impact energy in a crash. Additional features include a patent-pending Flex Gasket along the lower edge of the helmet, designed to reduce the role a helmet can play in certain collarbone impacts, tool-free breakaway visor bolts with integrated Allen key receiver for easy removal, and a central visor bolt hole, which does double-duty as the ideal mount for P.O.V. action cameras. - SPHERICAL TECHNOLOGY, POWERED BY MIPS — Spherical Technology's ball-and-socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. It also eliminates contact with hard plastic or slip-planes against the skin. - OPTIMIZED FRONT INTAKE VENTS — Giro engineers designed precise placement and shape of intake vents to optimize cool air flowing over riders' heads. - MAXIMIZED REAR EXHAUST VENTS — Our complex Wind Tunnel venting system allows hot air an easy escape route from the rear of the helmet. - BREAKAWAY VISOR BOLTS — Tool-free breakaway visor bolts are engineered with an integrated Allen key receiver for easy removal and replacement in case of crash. - DIRECTIONAL SNAP SYSTEM — In case of emergency, cheek pads are easily removable without disturbing the rider's head and neck position. - PATENT-PENDING FLEX GASKET — The zone along the lower edge of the helmet is designed to allow some flex, reducing the role a helmet can play in certain collarbone impacts. - STEALTH CAMERA MOUNT — The central visor bolt hole does double duty as an ideal location for mounting P.O.V. action cameras.

The Hard Charger Built for the hard charger, the Super DH is most at home on steep terrain-featuring Spherical Technology and full DH certification. Spherical Technology's Ball-and-Socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. The Super DH is loaded with additional features-including a 360-degree wraparound, tool-free removable chin bar beefy enough to satisfy the rigors of ASTM 1952 testing, a huge eyeglass- and goggle-friendly eye port, an adjustable-height visor, snap-in camera mount, Overbrow Ventilation and X-Static padding, and a quality fit that is second to none. The end result is uncompromising protection and performance, and unparalleled versatility. The Super DH is ready to take World Cup DH runs on the chin, bang out bike park laps until the chairlifts stop running, or settle into hours of back-country uphill grinding in search of that perfect ribbon of high-consequence singletrack. - SPHERICAL TECHNOLOGY—Spherical Technology's Ball-and-Socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. - MIPS—MIPS (Multi-directional Impact Protection System) is a leading slip-plane technology inside the helmet designed to help reduce rotational forces that can result from certain impacts. - REMOVABLE CHIN BAR—Removable protective chin bar designed for trail riding adaptability. Attaches with a simple 3-step connection process—no tools required. [Warning: All chin bars have limits, and serious injury or death can occur. Read owner's manual carefully before using your helmet.] - INTEGRATED BREAKAWAY CAMERA MOUNT—Seamless camera mount, requiring no zip ties or tape, is engineered to break away from the helmet upon impact to help reduce the risk of injury. - FLOAT FIT DH—A minimalist yet robust and lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments. - ADJUSTABLE VISOR—Adjustable visor allows for sun protection and easy goggle storage. - OVERBROW VENTILATION—Overbrow Ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation. - SWEAT GUIDE—Sweat Guide pad design pulls moisture away from the brow pad and eyewear. - FIDLOCK BUCKLE—Fidlock is an easy-to-use magnetic buckle. This time-saving feature slides closed laterally for an effortless, secure fit.

Waterproof One-Piece for Wet Trails or The Urban Jungle. When we create a killer product we want as many riders as possible to experience it. So for Winter '21, our unique take on the MTB wet weather Onesie is available in the Singletrack collection as well as MT500. Using the ExoShell20 fabric and sharing many of the features of its big brother, the Singletrack Onesie delivers excellent performance without breaking the bank. Perfect for wet muddy days in the forest or on the mountain, this more accessible wet weather beater is also ideal for conquering the urban jungle on the winter commute. With an extremely soft, noise-free outer face fabric and a super fine denier tricot inner layer sandwiching the thin PU membrane, Exoshell20 exceeds expectations of comfort and performance. The 10,000mm waterproof rating ensures water doesn't get in and a best-in-class breathability of 20,000g/m2/24hr keeps you dry from the inside. - Waterproof and breathable ExoShell20 3-layer fabric in a fully seam-sealed construction - Endura exclusive split front design for maximum mud protection and comfortable on-bike fit - Grown on hood with internal retainer strap and adjustment - Zipped napoleon chest pocket and front trouser pockets - Large underarm vents for temperature regulation - Adjustable wrist cuffs - Reflective trim - Riding in the rain has never been so much fun!

The Empire ACC continues to redefine the boundaries of high-performance cycling shoes for women. The iconic laced closure offers seven points of fit adjustment for unrivaled adjustment and comfort, and complements the breathable Evofiber synthetic upper that wraps to the contours of your foot like no other cycling shoe. The Easton EC90 ACC full-carbon sole offers the stiffness needed for everything from Grand Tours to gran fondos, with ultra-low 6.5mm stack height for a direct connection to the pedals. And Giro's adjustable SuperNatural Fit footbed lets you fine-tune the fit and arch support for an unmatched blend of performance and style.

Standout Style with Bold Visibility Choose to ride, choose to be seen. The new Ethos™ Mips® Shield is a revolution in transportation, with a clear, molded eye shield that stylishly adds protection from the elements while still allowing riders to use their existing eyewear. (The Ethos Mips Shield also is available without eye shield as the Ethos Mips.) Its compact and stylish form features the added protection of Mips® Brain Protection System highlighted by integrated LED front white lights, rear red lights, and amber turn signals, all controlled via an intuitive handlebar remote. The entire system is USB-C rechargeable with an estimated run time of 10 hours in low-blink mode and 5 hours in the high-blink mode, which delivers 45 lumens front and 30 lumens rear. Helmet and remote can be fully charged in just 2 hours and 1 hour, respectively. Despite the added technology, in-mold construction keeps the weight manageable, full hardbody coverage adds durability, and a Roc Loc® Mips City fit system plus quick-dry padding ensure comfort. Whether you're a dedicated bike commuter, running the kids to school on your e-cargo bike, or simply looking for added visibility as you ride around town, the Ethos Mips Shield is a look into the future. - REFLECTIVE WEBBING — Reflective threads are strategically woven into the helmet retaining straps for an added element of visibility. - INTUITIVE REMOTE — The handlebar-mounted remote controls the front and rear lights, allowing riders to select solid or flashing modes, change brightness levels, and easily activate the turn signals. - TURN SIGNALS — With their bright amber flashes, the integrated turn signals speak the common language of traffic, broadcasting the rider's intended path to other road users. - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces, while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. - ROC LOC CITY MIPS FIT SYSTEM — The Roc Loc City Mips fit system features a rubberized dial for easy adjustability and large plush pads for ultimate comfort and stability. The fit system is made of a durable flexible material for long term performance and daily lockability. The three positions of vertical adjustability, and 6cm range make this a perfect fit, for your daily use. - INTEGRATED AND RECHARGEABLE LED LIGHTS — Front and rear integrated and rechargeable LED lights: two front "be seen" white lights and two red rear lights for substantially increased visibility to drivers. HIGHLIGHTS - Built-in front (white) and rear (red) LEDs - Handlebar-activated turn signals (amber/yellow) - Micro-USB C rechargeable - Deep coverage - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

As pioneers of removable chin bar technology, we have a legacy to uphold and overcome. We designed the Super Air R from the ground up to push the boundaries of performance and versatility. With class-leading Flex Spherical MIPS technology, superior ventilation, a total weight that is 22% or 144 grams lighter than its predecessor and an easy 2-click removable chin bar, this is a true all-mountain performer. - 18 vents, 8 chin bar vents, 4 brow ports - Overbrow ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation - Compliance: CPSC bicycle - Flex spherical + MIPS - comprehensive energy management - flex spherical enhances our ability to address high-speed impacts, low-speed impacts, as well as rotational impacts. Think of it as comprehensive protection, with the added bonus of being able to design better helmet ventilation.. - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. - Progressive layering: the process of engineering a helmet liner with variable EPS foam densities to better manage the transfer of energies after some impacts - Goggleguide adjustable visor accommodates both goggles and glasses - Fit System: Float fit - a minimalist, lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS) - X-static padding - quick-drying materials, woven with real silver fibers, inhibit growth of odor-causing bacteria and fungi - Retention System: No-twist tri-glides: quick-adjust fasteners that help keep straps flat and properly positioned - Interior: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear - Safety: Wraparound chin bar - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 62cm

With Spherical Technology powered by MIPS and our pioneering 2-click removable chin bar, the legacy continues with the Super Air R in an all-mountain package. A New Standard As pioneers of removable chin bar technology, we have a legacy to uphold and overcome. We designed the Super Air R from the ground up to push the boundaries of performance and versatility-starting with Spherical Technology. Spherical Technology's Ball-and-Socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. Throw in superior ventilation, a total weight that is 22%, or 144 grams, lighter than its predecessor, and an easy 2-click removable chin bar-and you've got a true all-mountain performer. [Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.] - SPHERICAL TECHNOLOGY—Spherical Technology's Ball-and-Socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. - MIPS—MIPS (Multi-directional Impact Protection System) is a leading slip-plane technology inside the helmet designed to help reduce rotational forces that can result from certain impacts. - REMOVABLE CHIN BAR—Removable protective chin bar designed for trail riding adaptability. Attaches with a simple 2-step connection process—no tools required. [Warning: All chin bars have limits, and serious injury or death can occur. Read owner's manual carefully before using your helmet.] - INTEGRATED BREAKAWAY CAMERA MOUNT—Seamless camera mount, requiring no zip ties or tape, is engineered to break away from the helmet upon impact to help reduce the risk of injury. - FLOAT FIT—A minimalist, lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS). - ADJUSTABLE VISOR—Adjustable visor allows for sun protection and easy goggle storage. - OVERBROW VENTILATION—Overbrow Ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation. - SWEAT GUIDE—Sweat Guide pad design pulls moisture away from the brow pad and eyewear. - GOGGLE GRIPPER—Rubber grip on the back of the helmet keeps your goggle strap in place. Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

Made to keep you riding in comfort in a range of conditions. Part of our Airmap collection, the Cache Anorak is a lightweight, stowable and highly adaptable outer layer. An outer layer that can rise to the occasion is essential on the trail. With fully-taped 3-layer weather-protective Airmap on the body, and 2-layer Airmap at the rear side panels, hem and cuffs, the Cache Anorak resists the rain, shields you from the wind and keeps you fresh when you’re working hard. At the front, a 1/2 zipper with a lightweight chin guard meets a deep kangaroo pocket with dual zippered hand pockets. An additional zippered front pocket does double duty as a stow bag for the anorak, with clips to attach to your bike. Built with a relaxed, articulated fit that works on and off the bike, the Cache Anorak benefits from an elastic drawcord hem and half-elastic sleeve cuffs for a dialled fit and easy access with gloves. Reflective 7mesh logos and a reflective front pocket interior, visible when packed, complete the piece.

Made to keep you riding in comfort in a range of conditions. Part of our Airmap collection, the Cache Anorak is a lightweight, stowable and highly adaptable outer layer. Whether exploring new routes or racing to a checkpoint, a jacket that blends weather protection, breathability, and utility is a must. With fully-taped 3-layer Airmap on the body, and 2-layer Airmap at the rear side panels, hem and cuffs, the Cache Anorak holds off the rain, shields you from the wind and keeps you fresh when you’re working hard. To the front, a smooth-running 1/2 zipper with alight weight chin guard meets a deep kangaroo pocket with dual zippered hand pockets. An additional zippered front pocket doubles as a stow bag for the anorak, with clips to attach it to your bike. Tailored with a relaxed, shaped silhouette that works on and off the bike, the Cache Anorak features an elastic drawcord hem and half-elastic sleeve cuffs for a trim fit and easy access with gloves. Reflective 7mesh logos and a reflective front pocket interior, visible when packed, complete the piece.