Parts & Accessories
Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam
Designed to be abused and then re-used, the MT500 Plus Overshoe II uses super tough nylon faced neoprene with durable overlays in high wear areas and a hard-wearing rubber sole that is compatible with wide fit flat pedal and clipless MTB shoes. The front toe section incorporates aggressive, lugged tread to ensure that you don’t lose any of that vital traction needed to push back up the trail. - Super tough, nylon faced neoprene upper with highly durable overlays - Exclusive, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section for added grip - Rear double Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Clean shoes, clean lines, muddy trails - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
Reach for Giro's Proof Winter MTB Shoe Covers when insulation and protection from the elements is crucial. These wind- and water-resistant booties feature special stretch neoprene that maximizes warmth and minimizes bulk. Built-in flex zones offer an unmatched fit and range of motion. The interior is lined with thermal fleece for extra insulation and warmth. The molded rubber soles feature aggressive lugs for improved traction and durability when you're off the bike. You'll also appreciate the locking heel zippers and reflective accents.
Rugged Protection For Dirty Days On Your Mountain Bike Endura was among the first to employ neoprene in bike overshoes. A core stalwart of our collection, the MT500 Overshoe has been a best-seller for many years. Here in Scotland, we know a thing or two about foul weather gear, and this latest evolution of our waterproof durable mountain bike overshoe is the result of years of testing in the worst possible conditions. Endura’s unique molded rubber toe cap with a treaded underside provides grip when climbing steep and muddy slopes. The stand-out feature of Endura's MT500 Overshoe, and the one that sets it apart from the rest of the competition, is the molded rubber toe cap. This has been totally revamped with improved tread on the underside that gives you plenty of grip on steep, muddy slopes and also includes additional reinforced areas that improve the durability of the overshoe. Neoprene is the perfect material to construct overshoes from. Not only does it provide water and wind protection but it also adds an insulating layer over your foot. This keeps your circulation going allowing you to ride for longer in comfort, whatever the weather. - Tough nylon-faced neoprene upper - Offset rear zip with snap-down puller and zip guard - Molded rubber toe cap with treaded underside to help climb steep muddy slopes - Asymmetric front seam for improved fit - Hard-wearing reinforced sole protects the bottom of the overshoe from rocks and pedals - Crank-rub protection - Reflective detailing - Suitable for MTB cleats only - 90-day Satisfaction Guarantee
For a little extra protection in the cold for your toes, slip on a pair of the Element Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Rear zipper closure securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Fabric Content: MAIN: 44% Polyester, 38% Nylon, 14% Elastane, 4% PU; TOE & HEEL: 100% Polyester
Flat Pedal Friendly Mud Protection - Super tough, nylon faced neoprene upper with highly durable overlays - Novel, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section tread for added grip - Rear Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Reflective trim - Clean shoes, clean lines, muddy trails - Tight fit = clean shoes - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
Endura created the WP Gaiter Overshoes so you can train and enjoy the outdoors even in wet weather. These booties are completely waterproof with reflective accents. Their durable 3-layer nylon sole and elasticized stirrups fit a variety of footwear and cleats. With these shoe covers, you'll be ready when the storms roll through, regardless of which shoes you choose to wear.
- 100% reflective outer-facing panelling - Designed to be worn only with cycling shoes that have cleats - Waterproof and windproof PU coated fleece - Offset waterproof lock-zipper, heel loop, calf hook & loop adjustor and open sole - Reinforced toe and heel to be worn with cycling shoes
Water Frozen In Your Bottles? No Problem. Keep Riding Year Round With The Ultimate Cold Weather Overshoe That Keeps Your Feet Dry And Cozy In Even The Worst Of Weather. The Freezing Point Overshoe II is the next generation ultimate cold-weather riding overshoe. Rigorously tested in the depths of Scottish winter to give you the confidence to get out on your bike without having to worry about losing all feeling in your toes. Comfort was a key consideration when updating the Freezing Point Overshoe II. To improve pedaling comfort, the decision was taken to off-set the rear zip, moving it away from the flex point behind your ankle reducing the chance of it digging in. Smooth neoprene outer face creates a surface that water naturally runs off, while a thick brushed internal face fabric provides warmth and comfort. A durable sole with cleat access points stitched with a bulletproof aramid thread that extends the lifespan of our product beyond more flimsy alternatives on the market. - Fleece-lined neoprene construction - High-cut design for extra protection - Raw-edge neoprene with an inner silicone strip around the ankle to prevent movement and help keep water out - Offset rear zip with snap-down puller and zip guard - Hard-wearing aramid sole and stitching using aramid thread - Crank-rub protection print - Reflective details
Crafted from tough, waterproof neoprene, Endura's MT500 II Overshoes will keep your feet dry and warm. These booties feature waterproof rear zips and a welded center seam for a snug, smooth fit over your mountain bike shoes. The grooved rubber toe caps help on muddy slopes and steep climbs while the Kevlar soles withstand tough terrain. There are also reflective details for enhanced visibility. Say goodbye to muddy shoes! - Suitable for MTB cleats only
Pro Performance, Waterproof Pull-on - High stretch, waterproof, multi fabric construction - Wipe clean PU front panels with soft superstretch neoprene ankle - Zipless, pull-on design for comfort and shoe hugging fit - Highly durable, indestructible sole fabric overlays - Raw edge cuff with silicone gripper - Reflective trim
Wind is the enemy on the road, Windchill is your protection. Perfect for cold and dry conditions these road overshoes encase your shoes in a cozy insulating shield. - Windproof softshell fabric upper with light brushed lining - Deep elastic cuff with silicone gripper - Highly durable sole fabrics - Instep crank rub protection - Offset rear zipper access with snap-down puller - Reflective print twin stripes on the rear
Use these easy-to-slip-on covers over your treaded MTB shoes to keep your feet warm and dry in the sloppiest riding conditions. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable Kevlar bottom holds up to trail use - Synthetic leather toe bumper adds scuff protection - Bottom is designed to fit treaded MTB style shoes - BioViz high visibility colors and reflective elements
When the conditions get wet, keep pedaling with warm and dry feet in these easy-to-slip-on, wind- and water-protective covers. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable rubber toe area provides superior traction on wet surfaces - For road shoes with external cleats - BioViz high visibility colors and reflective elements
Offering multi-season protection from the elements, the FS260-Pro Slick Overshoe II comes in a compact and lightweight construction. - High stretch waterproof PU upper - Open sole design with durable toe panel and instep crank rub protection - Deep elastic cuff with silicone gripper - Offset rear zipper access with snap-down puller - Reflective print twin stripes on the rear
The FS260-Pro Nemo Overshoes help keep your feet warm on even some of the coolest, dampest days. Superstretch neoprene is used to ensure a snug fit over your shoes. A stretchy, abrasion-resistant sole and hard-wearing aramid stitching make this an overshoe that can be used time and time again. - High-stretch fabrics provide zipperless access - Superstretch waterproof thermal neoprene upper - MTB and road cleat compatible sole - Stretch abrasion-resistant sole/heel - Hard-wearing stitching using aramid thread - Reflective trim
- Stretch waterproof PU fabric with taped center front seam - Extensive 360-degree reflective trim on front, side, and rear - Flatlocked seams for additional durability - Opens fully at sole and up back heel with Velcro fastening for an adjustable fit - Stretch aramid abrasion resistant sole and toe - Suitable for all kinds of footwear and cleats
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
S2-Snap BOA cartridge assembly kit for personalizing your shoes. Includes: One left cartridge dial assembly, one right cartridge dial assembly, two laces. Compatible with the following models: - S-Works Road - S-Works XC - Women’s S-Works XC - Pro XC - Women’s Cascade - Rime Expert - Comp MTB - Women’s Motodiva
Your S-Works MTB shoes thanklessly accompany you through nature's muddiest, toughest conditions, so thank them and keep them ticking with Specialized's Replacement S-Works Mountain Shoe Lug Kit. These lugs replace the worn-out tread on your S-Works Mountain shoes. - Includes heel, ball, and toe pieces - Includes toe spikes - Sold in pairs; includes screws
Giro's Knit Shoe Covers add just a touch of extra warmth, protect your shoes from winter road grime, and light up the night with visibility-enhancing reflective ankle stripes. Cordura knit fabric is tough as nails and will stand up to enthusiastic use. - Small (36-39) | Medium (40-42) | Large (43-45)
These replacement walking pads are easy to install, and bring your shoes back to original spec, so you can keep on movin'. These replacement walking and heel pads integrate with the Republic LX, Republic, Civila, Territory and Reveille shoes, and the kit comes with full left and right replacement pads and includes hardware.
Let's get real; toe covers are a great way to deal with cold weather. They can be pulled over the toe of most cycling shoes and left on for the whole winter, and people do more miles on 45-degree days than they do on 25-degree days (even in Canada). Our toe cover uses our AmFIB softshell fabric to keep out the wind and rain and we positioned the band to sit behind toe spikes so that they will work with road or mountain shoes. Kevlar on the underside increases durability while the hook-and-loop closure makes the fit adjustable and the mounting quick. - AmFIB Softshell provides superior wind and water protection. - Innovative power-band secures front of shoe cover under toes. - Kevlar bottom with hook-and-loop closure allows easy on and off. - BioViz reflective elements for low-light visibility. - For road or mountain bike shoes.
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element Toe Covers, history is doomed to repeat itself this winter. Soft Shell fabrics are synonymous with unrivaled protection and quality and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your toes are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Fabric Content: Knit 44% Polyester, 38% Nylon, 14% Elastane, 4% PU. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Universal cleat opening means that the covers are compatible with both road and mountain shoes.
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
Every second, every watt, every advantage counts during a time trial. Giro's Ultralight Aero Shoe Covers are made from thin, light, form-fitting Lycra to improve your aerodynamics for the winning edge. Reflective, locking zippers in the back make for easy on/off.
Improve traction in the worst conditions with aggressive toe studs. Ideal for CX racing or Mountain riding in snow, ice, mud or even just hard pack dirt. - 15mm length is longer than standard - Durable stainless steel is engineered for long-lasting wear - Precision threads are compatible with most off-road cycling shoes. - Original equipment for some S-Works XC. - Packaged as 5pc, so you have a spare.
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
Born out of necessity during wet and muddy Midwest gravel races, our Gravel Gaiter keeps mud, sand and gravel out of your shoes. We took inspiration from the scree gaiters used by trail runners to develop a cycling-specific version that provides maximum breathability and durability so you can ride through the worst conditions. A locking zipper keeps the Gravel Gaiter securely in place and the Hypalon midfoot strap won't get in the way during treacherous hike-a-bike sections.
Page 1 of 2 Next page